Product Details
1. Product Overview
This is the Carrier CCM Chiller I/O Module, an original OEM control board manufactured by UTEC. It is specially designed for Carrier 19XR series centrifugal chillers and works in tandem with the ISM Integrated Starter Module shown previously. As the core main controller of large commercial centrifugal central air-conditioning units, it is widely applied in office buildings, shopping malls and industrial factory chilled water systems.
2. Key Functions
(1) Full-range Signal Acquisition
The green terminal blocks on the left collect all analog and digital signals from the chiller, including chilled/cooling water temperature, refrigerant high/low pressure, lube oil pressure, flow switch feedback, freeze protection and overload interlock signals, gathering all operational data of the unit.
(2) System Operation Logic Control
Equipped with an onboard microcontroller, the board calculates operating parameters based on collected temperature and pressure readings. It automatically adjusts compressor capacity and controls start-stop of chilled water pumps, condenser pumps and cooling tower fans. It also executes full safety protection logic including high/low pressure protection, oil differential protection and anti-freeze shutdown.
(3) Intercommunication with ISM Module
It transmits compressor start/stop commands to the ISM starter board, and receives real-time electrical feedback from ISM, such as three-phase voltage, operating current and ground fault signals, to realize coordinated compressor control and fault interlock protection.
(4) Fault Recording & Parameter Configuration
Once abnormal conditions happen, it stores fault codes and uploads operational & failure data to the unit’s display panel. The blue DIP switches on the right side are used to set unit model, communication address and configuration parameters for different variants of 19XR chillers.
3. Application
It is an original genuine spare part for Carrier 19XR centrifugal chillers. Together with the ISM module, it forms the complete core control system and is a common replacement component for chiller maintenance and overhaul.
Frequently Asked Questions
1. Product Info
McQuay lubricating oil filter cartridge, Part Number: Z4203777, an OEM maintenance spare part for McQuay water-cooled centrifugal & screw chillers.
2. Main Function
It is installed inside the chiller’s oil filter housing of compressor lubrication circuit:
- Effectively traps metal abrasion debris, welding residues and sludge contaminants suspended in refrigeration lubricant oil.
- Purifies circulating oil to protect compressor bearings, rotors and oil pump components from scratch or oil-path blockage, preventing low-oil-pressure alarm and unexpected unit shutdown.
- It is a regular-consumed spare part to be replaced during routine chiller maintenance.
3. Application Range
Specially compatible with McQuay WSC, PSC and other series large industrial central air conditioning chillers.
1. Product Description
This is TRANE original lube oil filter cartridge, an internal replacement filter element for TRANE centrifugal and screw water-cooled chillers, available in two different sizes.
2. Core Function
Installed inside the chiller’s oil filter housing on the compressor lubrication circuit:
- It traps metal wear debris, pipeline contaminants and oxidation residues mixed in refrigeration lubricant oil.
- Purifies circulating oil to safeguard compressor bearings, rotor assemblies and oil pump components from abrasion, clogging and unexpected low-pressure shutdown.
- It is a routine maintenance consumable, replaced periodically during unit service.
3. Product Feature
Multi-layer composite filter medium ensures high filtration precision and large dirt holding capacity. Multilingual printing on the filter reminds users to adopt genuine TRANE filter elements only.
4. Application
Compatible with TRANE CVHF, CVHE, RTWS and other series large industrial central air-conditioning chillers.
1. Product Overview
This picture displays a full range of HVAC chiller filter spare parts, including oil filters, replacement filter cartridges and refrigerant filter driers, specially for YORK, Trane, Carrier large centrifugal & screw water-cooled chillers.
2. Three Types & Functions
(1) Oil Filter Assembly (Black/White spin-on & canister style)
Installed on compressor lubrication oil circuit.It removes metal debris, abrasive particles and contaminants from refrigeration lubricant, to protect compressor bearings, oil pump and oil pump inverter board from wear or blockage failure. Two mainstream structures: spin-on disposable filter and bolt-on canister filter.
(2) Inner Replacement Filter Cartridges (Silver mesh & perforated metal elements)
The insert core fitted inside oil filter housings. Multi-layer mesh structure traps fine impurities in lubricating oil; replaceable during regular chiller maintenance.
(3) Liquid Line Filter Drier (Light gray Y-type with orange port)
Mounted on refrigerant liquid pipeline ahead of electronic expansion valve. It absorbs moisture inside refrigerant and intercepts system dirt, avoiding ice clogging and damage to expansion valve core.
3. Application
Widely used in industrial central air conditioning, commercial water-cooled chillers and process refrigeration equipment.
1. Product Name
Refrigeration Filter Drier, Model: KH45LE120
2. Core Function
This component is installed on the liquid refrigerant pipeline of chillers, right before the electronic expansion valve:
- Moisture Absorption: Filled with molecular sieve desiccant inside to soak up residual water in refrigerant, preventing ice clogging inside expansion valve and pipeline corrosion.
- Solid Filtration: Built-in fine mesh screen to trap welding slag, metal debris and oxide particles, protecting expansion valve core and compressor from abrasion or blockage damage.
3. Technical Specifications
- Connection: 7/8”-22 UNF thread
- Working Pressure: 500PSIG / 3.5MPa
- Compatible Refrigerants: CFC, HCFC, HFC series refrigerants (R22, R134a, R410A etc.)
- Arrow mark: Indicates refrigerant flow direction for correct installation
4. Application
Widely used on YORK, Carrier, Trane large water-cooled centrifugal & screw chillers and commercial central air conditioning refrigeration systems.
1. Product Overview
This is the Carrier HMI Operator Display Panel, the dedicated human-machine interface for Carrier 19XR series centrifugal chillers. It matches the previously introduced CCM I/O Module and ISM Integrated Starter Module to form a complete control system for large commercial central air conditioning chillers.
2. Main Functions
(1) Real-time Operation Data Monitoring
It receives operational data transmitted from the CCM mainboard, and displays all real-time working parameters including chilled & cooling water temperature, refrigerant pressure, compressor loading rate, motor voltage & current, oil pump, water pump and cooling fan status.
(2) Local Unit Control & Parameter Configuration
Technicians can start or stop the chiller locally via the panel buttons. It also supports access to the setting menu to configure target water temperature, maximum load limit and startup/shutdown logic parameters.
(3) Fault Alarm & History Inquiry
When faults such as high/low pressure trip, oil differential failure or anti-freeze protection happen, the screen pops up corresponding fault codes and detailed failure descriptions automatically. All historical fault records are stored inside for maintenance troubleshooting.
(4) Data Communication with Main Control Board
It exchanges bidirectional data with the CCM I/O control board via internal communication wiring, acting as the interactive terminal between field operators and the chiller’s core control system.
3. Application Scope
As an original OEM spare part exclusively for Carrier 19XR centrifugal chillers, this display is installed on the control cabinet of large water-cooled chillers for office buildings, shopping malls and industrial facilities.
1. Product Overview
This is the Carrier CCM Chiller I/O Module (Model CEPL130260), an original OEM main control board exclusively designed for Carrier 19XR series centrifugal chillers. It is matched and used together with the ISM Integrated Starter Module introduced earlier, serving as the core controller for large commercial central air-conditioning chillers widely installed in office buildings, shopping malls and industrial plants.
2. Core Functions
(1) Full-unit Signal Collection
The green pluggable terminal blocks on the left collect all analog and digital feedback signals from the chiller, including chilled/cooling water temperature, refrigerant high/low pressure, lubricating oil pressure, flow switch status, freeze protection and all safety interlock signals to gather the full operating data of the unit.
(2) System Logic & Auxiliary Equipment Control
Equipped with an onboard microprocessor, this board calculates operating conditions based on real-time collected temperature and pressure data. It automatically adjusts compressor loading and controls the start-stop of chilled water pumps, condenser pumps and cooling tower fans. Meanwhile, it realizes complete safety protection logics such as high/low pressure protection, oil differential protection and anti-freeze shutdown.
(3) Two-way Communication with ISM Module
It sends compressor start/stop control commands to the ISM integrated starter module, and receives real-time electrical parameters including three-phase operating voltage, running current and ground fault signals fed back from ISM to realize coordinated compressor control and fault interlock protection.
(4) Fault Storage & Parameter Configuration
Once unit faults occur, the board automatically stores fault codes and uploads operating data & fault information to the chiller display panel. The red DIP switch bank on the PCB is used to configure communication address and unit parameters to adapt to different specifications of 19XR chillers.
3. Application
It is an authentic original spare part for Carrier centrifugal chillers. Combined with the ISM starter board, it constitutes the complete core control system and is a critical replacement component for chiller maintenance and overhaul projects.
